PRODUCTS

SL-65/65A/65B

JOHNFORD

ITEM / MODELSL-65SL-65ASL-65B
Swing over bed (mm)Ø580(Ø22.8")Ø580(Ø22.8")Ø580(Ø22.8")
Swing over cross slide (mm)Ø450(Ø17.7")Ø450(Ø17.7")Ø450(Ø17.7")
Chuck size (inch)101215
Bar capacity (mm)Ø76.5(Ø3")Ø91(Ø3.6") / Ø102(Ø4") (Opt.)Ø116(Ø4.6")
Spindle noseA2-8A2-8 / A2-11(Opt.)A2-11
Spindle bore (mm)Ø86(Ø3.4")Ø115(Ø4.5")Ø132.5(Ø5.2")
Spindle transmission2 step Auto2 step Auto2 step Auto
Spindle speed (rpm)35003000 / 2800 (Opt.)2000
Spindle motor (kW)15 / 18.522 / 26
Spindle bearing diameter(mm)Ø130(Ø5.1")Ø160(Ø6.3")Ø180(Ø7.1")
No. of tools121212
Cross travel (X-axis) (mm)250(9.8")250(9.8")250(9.8")
Y-axis travel (mm)±40(1.6")±40(1.6")±40(1.6")
Longitudinal travel (Z-axis)
(for Y-axis)(mm)
1500(1400)
<59.1 "(55.1")>
1500(1400)
<59.1 "(55.1")>
1500(1400)
<59.1 "(55.1")>
Rapid traverse (X/Y/Z) (m/min)15 / 10 / 1815 / 10 / 1815 / 10 / 18
Tailstock travel
(for Y-axis)(mm)
1300(1200)
<51.1 "(47.2")>
1300(1200)
<51.1 "(47.2")>
1300(1200)
<51.1 "(47.2")>
Tailstock quill travel (mm)100(3.9")100(3.9")100(3.9")
Tailstock quill diameter (mm)Ø85(Ø3.3")Ø85(Ø3.3")Ø85(Ø3.3")
Tailstock spindle taper - FixedMT#5MT#5MT#5
Tailstock spindle taper - RotaryMT#4 (Opt.)MT#4 (Opt.)MT#4 (Opt.)
Servo motor (X-axis) (kW)3 / 4 (for-Y-axis)3 / 4 (for-Y-axis)3 / 4 (for-Y-axis)
Servo motor (Y-axis) (kW)1.61.61.6
Servo motor (Z-axis) (kW)444
Power turret motor(Y-axias) (kW)3.7 / 5.53.7 / 5.53.7 / 5.5
Bed Inclination /
Saddle Inclination (*)
45°45°45°
Weight (kg)10500(23100 lb)11000(24200 lb)11500(25300 lb)
Machine Dimensions(mm) - WxH2250 x 2160(88.6"x85")2250 x 2160(88.6"x85")2250x2510(88.6"x98.8")
Machine Dimensions(mm) - L5275(207.7")5275(207.7")5275(207.7")

※ All data subject to change without notice.
※ All the specifications are listed with the FANUC CNC system.

STANDARD ACCESSORIES

  • Coolant system
  • Splash guard
  • Through hole 3-jaw chuck
  • Programmable hydwaulic tailstock (for SL-35/50/65/70/80/100/120)
  • Hydraulic tailstock quill (for SL-20/30/40/40L)
  • Chain type chip conveyor
  • Tool box and various manuals
  • Tool holders (direct mounting type)
  • Auto lubrication with alarm
  • LED Working lamp
  • Type of guide ways: box ways
  • FANUC 0iTD controller

OPTIONAL ACCESSORIES

  • C-axis (C . S axis with angle encoder but no gearbox / C.F axis with gearbox)
  • C+Y-axis
  • Contact tool setting system (Renishaw TS-20 or BLUM NT-A2 / NT-A3 )
  • Parts catcher
  • Tool holders (VDI type)
  • Programmable hydraulic tailstock (for SL-20/30/40/40L)
  • Bar feeder interface (or bar feeder)
  • 2 step auto gearbox (for SL-20/30/35/40/40L)
  • Rotary tailstock
  • Angle encoder for C-axis