PRODUCTS

SL-70A/80A/100A/120A/70B/80B/100B/120B

JOHNFORD

ITEM / MODELSL-70ASL-80ASL-100ASL-120ASL-70BSL-80BSL-100BSL-120B
Swing over bed (mm)Ø700(Ø27.6")Ø700(Ø27.6")Ø700(Ø27.6")Ø700(Ø27.6")Ø700(Ø27.6")Ø700(Ø27.6")Ø700(Ø27.6")Ø700(Ø27.6")
Swing over cross slide (mm)Ø540(Ø21.3")Ø540(Ø21.3")Ø540(Ø21.3")Ø540(Ø21.3")Ø540(Ø21.3")Ø540(Ø21.3")Ø540(Ø21.3")Ø540(Ø21.3")
Chuck size (inch)1212121215151515
Bar capacity (mm)Ø91(Ø3.6") / Ø102(Ø4") (Opt.)Ø91(Ø3.6") / Ø102(Ø4") (Opt.)Ø91(Ø3.6") / Ø102(Ø4") (Opt.)Ø91(Ø3.6") / Ø102(Ø4") (Opt.)Ø116(Ø4.6")Ø116(Ø4.6")Ø116(Ø4.6")Ø116(Ø4.6")
Spindle noseA2-8 / A2-11(Opt.)A2-8 / A2-11(Opt.)A2-8 / A2-11(Opt.)A2-8 / A2-11(Opt.)A2-11A2-11A2-11A2-11
Spindle bore (mm)Ø115(Ø4.5")Ø115(Ø4.5")Ø115(Ø4.5")Ø115(Ø4.5")Ø132.5(Ø5.2")Ø132.5(Ø5.2")Ø132.5(Ø5.2")Ø132.5(Ø5.2")
Spindle transmission2 step Auto2 step Auto2 step Auto2 step Auto4 step4 step4 step4 step
Spindle speed (rpm)3000 / 2800 (Opt.)3000 / 2800 (Opt.)3000 / 2800 (Opt.)3000 / 2800 (Opt.)2000200020002000
Spindle motor (kW)22 / 2622 / 2622 / 2622 / 2622 / 2622 / 2622 / 2622 / 26
Spindle bearing diameter (mm)Ø160(Ø6.3")Ø160(Ø6.3")Ø160(Ø6.3")Ø160(Ø6.3")Ø180(Ø7.1")Ø180(Ø7.1")Ø180(Ø7.1")Ø180(Ø7.1")
No. of tools1212121212121212
Cross travel (X-axis) (mm)295(11.6")295(11.6")295(11.6")295(11.6")295(11.6")295(11.6")295(11.6")295(11.6")
Y-axis travel (mm)±50(2")±50(2")±50(2")±50(2")±50(2")±50(2")±50(2")±50(2")
Longitudinal travel
(Z-axis)
(for Y-axis)(mm)
1550(1450)
<61 "(57.1")>
2000(1900)
<78.7 "(74.8")>
2500(2400)
<98.4 "(94.5")>
3000(2900)
<118.1 "(114.2")>
1550(1450)
<61 "(57.1")>
2000(1900)
<78.7 "(74.8")>
2500(2400)
<98.4 "(94.5")>
3000(2900)
<118.1 "(114.1")>
Rapid traverse (X/Y/Z) (mm)12 / 10 / 1512 / 10 / 1512 / 10 / 1512 / 10 / 1512 / 10 / 1512 / 10 / 1512 / 10 / 1512 / 10 / 15
Tailstock travel
(for Y-axis)(mm)
1200(1100)
<47.2 "(43.3")>
1700(1600)
<66.9 "(63")>
2200(2100)
<86.6 "(82.7")>
2700(2600)
<106.3 "(102.4")>
1200(1100)
<47.2 "(43.3")>
1700(1600)
<66.9 "(63")>
2200(2100)
<86.6 "(82.7")>
2700(2600)
<106 "(102.4")>
Tailstock quill travel (mm)125(4.9")125(4.9")125(4.9")125(4.9")125(4.9")125(4.9")125(4.9")125(4.9")
Tailstock quill diameter (mm)Ø125(Ø4.9")Ø125(Ø4.9")Ø125(Ø4.9")Ø125(Ø4.9")Ø125(Ø4.9")Ø125(Ø4.9")Ø125(Ø4.9")Ø125(Ø4.9")
Tailstock spindle taper - FixedMT#5MT#5MT#5MT#5MT#5MT#5MT#5MT#5
Tailstock spindle taper - RotaryMT#5 (Opt.)MT#5 (Opt.)MT#5 (Opt.)MT#5 (Opt.)MT#5 (Opt.)MT#5 (Opt.)MT#5 (Opt.)MT#5 (Opt.)
Servo motor (X-axis) (kW)3 / 4 (for Y-axis)3 / 4 (for Y-axis)3 / 4 (for Y-axis)3 / 4 (for Y-axis)3 / 4 (for Y-axis)3 / 4 (for Y-axis)3 / 4 (for Y-axis)3 / 4 (for Y-axis)
Servo motor (Y-axis) (kW)3.83.83.83.83.83.83.83.8
Servo motor (Z-axis) (kW)44444444
Power turret motor
(Y-axias) (kW)
3.7 / 5.53.7 / 5.53.7 / 5.53.7 / 5.53.7 / 5.53.7 / 5.53.7 / 5.53.7 / 5.5
Bed Inclination /
Saddle Inclination (*)
45°45°45°45°45°45°45°45°
Weight (kg)14000(30800 lb)15000(33000 lb)16000(35200 lb)17000(669.3")14000(30800 lb)15000(33000 lb)16000(35200 lb)17000(669.3")
Machine dimensions(mm) - WxH2430 x 2510(95.7"x98.8")2430 x 2510(95.7"x98.8")2430 x 2510(95.7"x98.8")2430 x 2510(95.7"x98.8")2430 x 2510(95.7"x98.8")2430 x 2510(95.7"x98.8")2430 x 2510(95.7"x98.8")2430 x 2510(95.7"x98.8")
Machine dimensions(mm) - L5485(216")6930(272.8")6985(275")7485(294.7")5485(216")6930(272.8")6985(275")7485(294.7")

※ All data subject to change without notice.
※ All the specifications are listed with the FANUC CNC system.

STANDARD ACCESSORIES

  • Coolant system
  • Splash guard
  • Through hole 3-jaw chuck
  • Programmable hydwaulic tailstock (for SL-35/50/65/70/80/100/120)
  • Hydraulic tailstock quill (for SL-20/30/40/40L)
  • Chain type chip conveyor
  • Tool box and various manuals
  • Tool holders (direct mounting type)
  • Auto lubrication with alarm
  • LED Working lamp
  • Type of guide ways: box ways
  • FANUC 0iTD controller

OPTIONAL ACCESSORIES

  • C-axis (C . S axis with angle encoder but no gearbox / C.F axis with gearbox)
  • C+Y-axis
  • Contact tool setting system (Renishaw TS-20 or BLUM NT-A2 / NT-A3 )
  • Parts catcher
  • Tool holders (VDI type)
  • Programmable hydraulic tailstock (for SL-20/30/40/40L)
  • Bar feeder interface (or bar feeder)
  • 2 step auto gearbox (for SL-20/30/35/40/40L)
  • Rotary tailstock
  • Angle encoder for C-axis