PRODUCTS

VHMC-630

JOHNFORD

TEM / MODELVHMC-630
Table working surface (mm)630 x 630 (24.8" x 24.8")
Table load max. (kg)1200 (2640 lb)
Screw holeM16 x P2.0
X axis travel (mm)1000 (39.4")
Y axis travel (mm)800 (31.5")
Z axis travel (mm)950 (37.4")
HORIZONTAL - Spindle nose to table center (mm)-150~800 (-5.9"~31.5")
HORIZONTAL - Spindle center to table top (mm)50~850 (2"~33.4")
VERTICAL - Spindle nose to table center (mm)150 ~ 950 (5.9" ~ 37.4")
VERTICAL - Spindle center to table top (mm)1025 (40.3" )
Spindle taperBT-50 / CAT-50
Spindle speed (rpm)20 ~ 6000
X-Y-Z Cutting feed (mm/min)1~12000
X-Y-Z Rapid traverse ( m/min)18 / 10 / 18
Tool magazine capacity60 (80, 120 Opt.)
Max. tool diameter x lengthØ 125 x 400
Max. tool weight (kg)15 (33 lb)
Tool selectionBi-direction random type shortest path
Tool to tool change time (sec)3.5
Spindle motor (cont./30 min) (kW)11 / 15 built-in
Hydraulic pump motor (kW)3.8
X, Y, Z axis drive motor (kW)4.5 / 3.8 / 4.5
Table index1° (0.001° Opt.)
Number of pallets2 (6, 12 Opt.)
Change time (APC) (sec)15 sec
Machine dimensions (L x W x H) (mm)6450 x 4000 x 3400 (253.9" x 157.4" x 133.8")
Machine weight (kg)21000 (46200 lb)

※ All data subject to change without notice.
※ All the specifications are listed with the FANUC CNC system.

STANDARD ACCESSORIES

  • Cycle finish light (V30)
  • Coolant unit
  • Levelling bolts & pads
  • Hydraulic unit
  • Spindle oil cooling cooler
  • Chip conveyor & chip bucket
  • Tool in tool box
  • Full enclosure splash guard
  • 1 degree rotary table
  • Lubrication with alarm
  • Rigid tapping
  • Air system with alarm
  • Spindle speed/load meter
  • 2 pallet APC

OPTIONAL ACCESSORIES

  • Contact tool setting system (Renishaw TS-27R or BLUM NT-A2 / NT-A3)
  • High pressure coolant thru tool tip
  • High pressure coolant thru spindle
  • Arm type 60, 80, 12 tools ATC
  • 6 or 12 pallets APC
  • Linear scale
  • Rotary table (0.001°)
  • Built-in spindle (15000/18000/20000 rpm for HSK A63)
  • Direct drive spindle (10000 rpm for BT / CAT / BBT-50 / HSK A100)
  • Built-in spindle (10000 rpm for HSK A100)
  • FANUC 31i-MB controller
  • Workpiece measuring system ( Renishaw OMP-60 or BLUM TC-50)
  • Manual guide i/0i(0iMD) ; Manual guide i (31iMB)